261 Seneca Road, Sherwood Park, AB, T8A 4G6
Sort By:
Hand/ Power Tool Safety
$69.99
Hand/ Power Tool Safety
This lesson provides an introduction to the hazards associated with hand and power tool use and describes the actions workers can take to reduce their risks of hand and power tool-related accidents and injuries. Completing this lesson does not on its own qualify or authorize a worker to operate a sp...
Rigging Safety Training
$69.99
Rigging Safety Training
This lesson will teach you how to safely rig loads that will be moved by cranes, hoists, or other equipment. This includes planning a lift, inspecting and selecting slings, determining a loadÕs weight, using a sling angle chart, and working with a crane operator.
Industrial Ergonomics Training
$69.99
Industrial Ergonomics Training
This lesson introduces the concept of ergonomics in a general industry setting, brings awareness to the most common cumulative trauma disorders (CTDs), explores strategies to prevent or control CTDs, and identifies the basics of an ergonomics safety program.
Lockout / Tagout Training
$69.99
Lockout / Tagout Training
The goal of this lesson is to provide awareness level training for all employees about the existence of hazardous energy sources; the isolation of those energy sources during certain maintenance and repair activities; and the communication and control procedures that limit access to those energy sou...
Respiratory Protection Training
$69.99
Respiratory Protection Training
The goal of this lesson is to teach workers the purpose of respirators, the factors that influence respirator effectiveness, and the limitations and capabilities of different types of respirators. Workers will learn the employer's responsibilities for respirator use in the workplace, the preparation...
Laboratory Compressed Gas Safety
$69.99
Laboratory Compressed Gas Safety
The purpose of this lesson is to provide an understanding of the hazards of compressed gas and best practices for using, moving, and storing compressed gas cylinders in laboratories and makerspaces. If you use compressed gases for welding, you are required to take additional, specific training.
